Special Offer5% OFF on All Services for New Clients Only!Claim Offer →

No Heat and No Hot Water? What It Means When Your Boiler Has a Tankless Coil

Last updated Reviewed by Waseem Shahzad, Lead Technician

No Heat and No Hot Water? What It Means When Your Boiler Has a Tankless Coil

In short: When the heat and the hot water quit together, your boiler is almost always the reason. Here's how a tankless coil works, what usually fails, and what you can safely check before you call.

By the K2 Cooling & Heating service team, Deer Park, NY. Updated November 2026.

It's 6 a.m., the house is cold, and the shower runs cold too. When both quit at the same time, the problem almost always sits in one place: your boiler. A lot of Long Island homes, especially older capes, colonials and hi-ranches heated with oil, make their hot water inside the boiler using a tankless coil. One machine does two jobs, so when it stops, you lose both.

What does it mean when you have no heat and no hot water at the same time?

It means the one appliance making both has stopped firing or stopped moving heat. In a home with a tankless coil, the boiler heats the water for your radiators and your faucets. An empty oil tank, a burner lockout, a tripped switch or a failed control will knock out both at once.

If you only lost hot water and the heat still works, that points to the coil itself, usually scale buildup or a stuck mixing valve. If you lost both, start with the boiler.

What is a tankless coil on a boiler?

A tankless coil is a copper coil that sits inside the boiler's hot water jacket. Cold water from your main runs through it, picks up heat from the boiler water around it, and comes out hot at your faucet. There's no storage tank, which is why it's called tankless.

You'll usually spot it as a flat plate bolted to the side or front of the boiler with two water pipes attached, plus a mixing (tempering) valve nearby that blends in cold water so the tap doesn't scald you.

Because the boiler has to stay hot all year to make hot water, these systems run in July too. That's normal for this setup, not a sign something's wrong.

Why did my boiler stop making heat and hot water?

The most common causes are an empty oil tank, a burner that went into safety lockout, a tripped emergency switch, or a failed aquastat (the control that keeps the boiler at temperature). Low system pressure and a clogged oil filter or nozzle come up a lot too, especially in the first cold weeks of the season.

  • Out of oil or a stuck tank gauge. Gauges stick. If you're not on automatic delivery, check this first.
  • Burner lockout. The burner tried to light, failed, and shut itself off for safety. The red reset button on the burner's primary control will be popped up.
  • Emergency switch off. The red switch plate at the top of the basement stairs gets flipped by accident more often than you'd think.
  • Failed aquastat. When this control fails, the boiler doesn't know when to fire.
  • Low system pressure. Many boilers won't run safely with too little water in the system.
  • Clogged filter or nozzle. Sludge from the bottom of an older oil tank can choke the line, often right after a delivery stirs it up.

What can I safely check before calling a technician?

You can check five things in about five minutes: the oil tank gauge, the emergency switch, the thermostat, the circuit breaker, and the pressure gauge on the boiler. Anything past that, including opening up the burner, should be left to a licensed technician.

  1. Check the oil gauge on the tank. If it reads at or near empty, call your oil company first.
  2. Make sure the emergency switch, usually at the top of the basement stairs, is on.
  3. Set the thermostat a few degrees above room temperature and swap the batteries if it uses them.
  4. Check the breaker panel for a tripped breaker marked boiler or burner.
  5. Look at the pressure/temperature gauge on the boiler and note the reading for the technician.

Tip from our technicians on the reset button: press it once. If the burner doesn't stay running, stop there. Pressing it again and again can pump unburned oil into the combustion chamber, and that oil can light off all at once when the burner finally fires. That turns a simple service call into a much bigger repair, and it's a real safety risk.

If you smell oil, see smoke, or hear the burner rumble or puff when it starts, turn the emergency switch off and call for service.

Why do I have heat but no hot water from my tankless coil?

When the heat works but the hot water is weak or lukewarm, the coil is usually scaled up with mineral buildup, or the mixing valve is stuck. Long Island water carries enough minerals to coat the inside of a coil over the years, which slows the water down and cuts how much heat it can pick up.

Signs it's the coil and not the boiler:

  • The shower starts hot, then fades fast
  • Low water pressure on the hot side only
  • Hot water temperature swings when someone opens another tap
  • Your radiators or baseboards are heating normally

A technician can descale (flush) the coil, replace the mixing valve, or replace the coil gasket or the coil itself if it's leaking.

Should I repair the tankless coil or switch to a separate water heater?

If the boiler is in good shape and the coil just needs a flush or a new mixing valve, repair is usually the right call. If the coil leaks, the boiler is getting old, or you're tired of the boiler running all summer, a separate indirect water heater is worth a look. An indirect tank still uses the boiler but stores hot water, so you get steadier temperature and the boiler gets to rest between calls.

We'll tell you plainly which one makes sense for your house. Plenty of tankless coils have years left in them after a good cleaning.

The call we get every fall

The first real cold snap brings the same call to our Deer Park office again and again: no heat, no hot water, and the homeowner has already hit the reset button three or four times. In most of these houses the burner hadn't been serviced since last winter, the nozzle and filter were overdue, and the first long run of the season pushed it over the edge. A tune-up in September would have caught it. That's the whole reason we push yearly boiler maintenance before heating season starts.

How can I keep this from happening again?

Book a yearly boiler tune-up before heating season. A technician replaces the oil nozzle and filter, cleans the combustion chamber, tests the controls and safety devices, and checks the tankless coil and mixing valve. Staying on automatic oil delivery and flushing a hard-water coil every few years helps too.

No heat and no hot water on Long Island? Call K2.

K2 Cooling & Heating services boilers, tankless coils and indirect water heaters across Suffolk and Nassau County from our shop in Deer Park. If the house is cold and the shower's cold too, call us at (631) 414-7141 or book service online. You can also read about our heating repair service, our Suffolk County service area, or our guide to 10 common heating problems and their fixes.

Need a technician rather than a guide? See our boiler repair service, or read about HVAC repair in Deer Park, NY. K2 answers 24/7 at (631) 414-7141.

Expert Insights

Frequently Asked Questions

Yes. A boiler with a tankless coil heats your household water inside the boiler itself. Cold water runs through a copper coil sitting in the hot boiler water and comes out hot at the tap, so there's no separate tank to store it.
If your boiler has a tankless coil, it has to stay hot all year to make your hot water. Running in summer is normal for that setup. If you'd rather the boiler rest in warm months, an indirect water heater is one option to ask about.
No. Press it once. If the burner won't stay running, stop and call a technician. Pressing it repeatedly can flood the combustion chamber with oil, which can cause a hard light-off, smoke, or damage when the burner finally fires.
Hot water that starts hot and fades fast, low pressure on the hot side only, or temperature that swings when another tap opens are the common signs. Mineral scale from Long Island water builds up inside the coil and a flush usually brings it back.
Yes. K2 Cooling & Heating services oil and gas boilers, tankless coils, mixing valves and indirect water heaters across Suffolk and Nassau County from our Deer Park shop. Call (631) 414-7141 to book a visit.
Professional Solutions

Related Heating & Cooling Services

All Services

Helpful HVAC Resources for Long Island Homeowners & Businesses

Keep your heating and air conditioning equipment operating at peak efficiency all year long.

Continue Reading

Related Articles: Heating

All Heating Articles