Oil Burner Service and Tune-Ups on Long Island
Last updated Reviewed by Waseem Shahzad, Lead Technician
Annual oil burner tune-ups and oil boiler repairs for homes within 15 miles of Deer Park.
Oil heat still warms a lot of Long Island homes, and an oil burner needs more regular care than gas equipment. K2 tunes up and repairs oil burners and oil boilers from our shop at 60 S 2nd St, Unit V in Deer Park, for homes within about 15 miles across western Suffolk and eastern Nassau.
Our Housecall Pro records show 30 oil burner jobs at 28 homes, from yearly tune-ups to no-heat repairs: a soft lockout cleared with a new nozzle in Wyandanch, a short-cycling burner that needed a new gun assembly and air bleeder in North Babylon, and a cad cell and solenoid valve replaced in Bay Shore. Here is what a tune-up covers and what goes wrong between them.
What does an oil burner tune-up include?
Our oil burner tune-up replaces the nozzle, oil filter and pump strainer, cleans the electrodes, burner head and air intake, tests the burner motor and adjusts the air shutter, vacuums the combustion chamber and flue, and tests the safety controls, including the limit, aquastat and low-water cutoff. We also check system pressure and the expansion tank.
How often does an oil burner need service?
Once a year, ideally before the heating season. Oil leaves soot in the combustion chamber and flue, and the nozzle and filter wear and clog over a season. Skipping a year is a common reason for midwinter lockouts, smoky starts and higher oil use, and a dirty boiler transfers less heat to the water.
Why does an oil burner lock out?
The primary control shuts the burner down when it does not see a flame within a few seconds. Common causes are a clogged nozzle or filter, air in the oil line, a dirty or failed cad cell, worn electrodes, a failed solenoid valve or pump, or an empty tank. One press of the reset button is the limit.
Why is my oil burner short cycling?
A burner that turns on and off before the boiler reaches temperature can have a worn gun assembly, a nozzle problem, a failing control or air trapped in the system. In North Babylon in December 2025 a short-cycling oil boiler needed a new burner gun and air bleeder, which our technician diagnosed on the service call.
What does a cad cell do?
The cad cell is a small light sensor that looks at the flame and tells the primary control the burner lit. When it gets sooty or fails, the control assumes there is no flame and locks the burner out. Cleaning or replacing it, as we did on a Bay Shore burner in November 2025, is a common repair.
What should you do if you smell oil or see smoke?
Turn the boiler off at its service switch. A strong oil smell, a puff-back of smoke or soot around the boiler means the burner is not burning cleanly or oil is leaking. In Farmingdale in December 2024 a homeowner smelled oil, shut the boiler off and called; our technician found a leak in the oil line.
What goes wrong with oil burners between tune-ups?
- Soft lockout or no heat. In Wyandanch in April 2023, a boiler in soft lockout needed a nozzle change, and the homeowner supplied the nozzle.
- Short cycling. A worn gun assembly and a failed air bleeder kept a North Babylon burner from reaching temperature in December 2025.
- Worn gun assembly. In Deer Park in September 2025 we replaced a burner's gun, nozzle and motor assembly, bled the boiler and test-ran it.
- Flame sensing and fuel valve faults. A dirty or failed cad cell and a sticking solenoid valve, both replaced on a Bay Shore burner in November 2025.
- Oil leaks and odors. A leaking oil line in Farmingdale in December 2024, found after the homeowner smelled oil and shut the boiler off.
- Oil-fired water heaters. On a Dix Hills oil-fired water heater in July 2025, we replaced two oil filters and cleaned the hot water and ignition sensors.
- Zones not heating. Not every oil-boiler no-heat call is the burner: a failed zone valve motor left one floor of a Dix Hills home cold in January 2026.
How does an oil burner service visit work?
- Safety first. We check for oil leaks, soot and draft before running the burner.
- Fuel side. Replace the oil filter and pump strainer, and bleed air from the line where needed.
- Burner. Replace the nozzle, clean the electrodes, burner head and air intake, test the motor and set the air shutter.
- Boiler. Vacuum the combustion chamber and flue passages and inspect the liner, baffles and seals.
- Controls and water side. Test the limit, aquastat and low-water cutoff, check pressure and the expansion tank, and bleed air from the system.
- Run and report. Fire the burner through full cycles and tell you about anything that is starting to wear.
What affects the cost of oil burner service?
We don't post a single price for oil burner work. A tune-up and a repair are quoted before work starts. What moves the figure:
- Tune-up or repair. A yearly tune-up is a set scope; a no-heat repair depends on the part that failed.
- Parts. A nozzle and filter are small parts; a gun assembly, primary control, pump or solenoid valve is more.
- Condition. A boiler that skipped several tune-ups can need a deeper cleaning, which is quoted separately if the technician recommends it.
- Maintenance plans. Plan members get up to 10% off most repairs; see our maintenance plans.
When is an oil boiler worth replacing?
Most oil burner problems are repairs: nozzles, filters, electrodes, cad cells, controls and gun assemblies are all replaceable. Replacement becomes the conversation when the boiler itself leaks, its sections are cracked, or it needs repeated repairs and burns far more oil than it should.
When you replace, you can stay with oil or switch fuel. See our oil-to-gas conversion and oil-to-heat-pump conversion pages, the oil tank removal guide and our post on whether gas is available on your street. Financing is available through Rheem KwikComfort, with credit provided by Synchrony Bank, subject to credit approval. See financing for how it works.
What should you check before calling about an oil burner?
Check the tank gauge first, then the thermostat, the red-plated service switch and the breaker. Press the reset button once; if the burner locks out again, stop and call. Our oil burner reset button guide explains why repeated resets are risky. After a power outage, see what to check when a boiler won't restart. For a no-heat emergency, see emergency oil boiler repair.
Brands We Install and Service
Our technicians work on all major brands. The ones we install most often (see all brands):
Oil burner service near Deer Park
We serve homes within about 15 miles of our Deer Park shop. The towns we visit most:
- Deer Park, NY
- Babylon, NY
- West Babylon, NY
- North Babylon, NY
- Dix Hills, NY
- Commack, NY
- Brentwood, NY
- Bay Shore, NY
- Huntington, NY
- Melville, NY
- Farmingdale, NY
- Hauppauge, NY
What Our Customers Say
"This is my second (distinct) job with K2 HVAC and I couldn't be more appreciative of their prompt and quality services. The first job (a replacement of my heating unit) was handled excellently by Shelby and the second (a replacement of my hot water unit) was amazingly handled by Waseem. The backend customer support is fantastic too, as Sadia is ever responsive by text and phone call. All said, I recommend their services wholeheartedly!"
"Waseem is excellent. He checked my hearing system, diagnosed the problem and fixed the whole system. Now the heat is working excellently. I am high recommending this company to any person’s house. He is very thorough and spent as much as was needed to repair the heat. We are very thankful. He is excellent. Thank you so much to your company."
"This was my first time using K2 Cooling & Heating, and I couldn't be happier with the experience. Waseem arrived on the scheduled day right on time and took the time to listen carefully to the issues I was having with my HVAC unit before beginning any work. He quickly diagnosed the problem and explained everything clearly in a way that was easy to understand. His professionalism, knowledge, and attention to detail were outstanding. He fixed the issue efficiently and made sure everything was working properly before he left. It's refreshing to work with someone who genuinely cares about providing excellent customer service. I highly recommend Waseem and K2 Cooling & Heating to anyone looking for honest, reliable, and knowledgeable HVAC service. I will definitely be using them again in the future!"
Oil Burner Service: Frequently Asked Questions
Can I change my own oil filter?
It is possible, but it involves shutting off the oil, catching spilled oil and bleeding air from the line afterward, or the burner may not restart. Most homeowners leave it to the yearly tune-up, which replaces the filter and strainer anyway.
Why does my oil burner smell when it starts?
A brief smell at startup can happen, but a strong oil smell, smoke or soot means the burner is not burning cleanly or oil is leaking. Turn the boiler off and call. A tune-up adjusts the air and checks the nozzle and electrodes.
My tank ran out of oil. What now?
After the delivery, press reset once. If the burner does not start, the line probably has air or sludge in it and needs bleeding and a new filter. Call us rather than pressing reset repeatedly.
Do you service oil-fired water heaters too?
Yes. On a Dix Hills oil-fired water heater, we replaced two oil filters and cleaned its sensors. Oil water heaters need the same filter and burner care as oil boilers.
Is it worth converting from oil to gas?
It depends on whether gas reaches your street, the age of your boiler and how long you plan to stay. Our oil vs gas vs heat pump cost calculator compares running costs, and we can quote a conversion when you are ready.
Book Oil Burner Service With K2
Call or text (631) 414-7141 any time, or send the form and we will call you back to schedule. You get the cause and the price before any work starts. Financing is available through Rheem KwikComfort, with credit provided by Synchrony Bank, subject to credit approval.
Long Island: see boiler repair across Long Island.
Related services: boiler repair, tune-ups, steam and hot-water boilers and water heaters.
Recent oil burner jobs

Oil boiler tune-up before the heating season
Huntington Station · Heating Tune-Up · October 2026
A heating-season tune-up on an oil boiler: new oil filter, a full clean, and the system water drained and refilled.

Oil boiler tune-up with two air bleeders replaced
Stony Brook · Heating Tune-Up · October 2026
A fall tune-up on an oil boiler: burner cleaned, oil filter serviced, two failed air bleeders replaced and the system refilled with fresh water.
Other HVAC Services
All ServicesNeed Oil Burner Service?
Contact K2 Cooling & Heating today for a free upfront estimate or 24/7 emergency service.